4
CHECKS AND MAINTENANCE
40
GB
KEY TO SYMBOLS
Tightening torque
Threadlocker Medium
Grease
1
3
2
GEARBOX OIL
CHECK
Hold the vehicle upright.
Remove screw
2
: the oil must arrive at the
lower edge of the hole.
Remove filler cap
1
and top up with fresh
oil.
When the operation is completed, screw
on cap
1
and screw
2
.
REPLACEMENT
Always renew the oil while the engine
is hot:
- Place a container under the engine
- Unscrew filler cap
1
and drain plug
3
- Empty the crankcase completely
- Close plug
3
- Pour in 850 gr. / 820 cc of oil
- Verify the level as described above
- Screw on filler cap
1
again.
WARNING:
Hot oil can cause severe burns!
WARNING:
Dispose of used oil in compliance with local regulations.
NOTE:
Change the gear box oil after the first 500 km/350 miles. For subsequent oil changes,
follow the instructions given on the chart on page 53, using the lubricants recom-
mended on page 16.