EN
21
NOTE:
>
At the small capacitor range, the reading will include the small value because some
influence from the distribution of test leads. It will not influence the accuracy of measuring.
>
It takes time to steady the reading when measuring high capacity.
4.8 MEASURING TEMPERATURE
1. Set the rotary switch at the °C range position.
2. The “LCD” display will show the current environment temperature.
3. When measuring the temperature with thermocouple, temperature probe for this
meter can be used. Inserts “K” type thermocouple into the temperature measuring
socket on the front panel and contact the object to be measured with the thermo-
couple probe.
4. You can get reading from LCD.
4.9 MEASURING FREQUENCY
1. Connect the black test lead to the COM jack and the red test lead to the V/
Ω
jack.
2. Set the rotary switch at the desired 20kHz range position.
3. Connect test leads across the source or load under measurement.
4. You can get reading from LCD.
NOTE:
>
Reading is possible at input voltages above 10Vrms, but the accuracy is not guaranteed.
MultimetroDigitale.book Page 21 Friday, September 26, 2003 6:34 PM
