EN
6
OPERATOR MAINTENANCE
Warning
To avoid possible electrical shock disconnect the thermocouple connectors from the thermometer
before removing the cover.
BATTERY REPLACEMENT
The battery symbol appears on the lower right of the LCD when the 9V battery needs to be replaced.
Replace the 9V battery as follows:
1 Turn the meter off and disconnect the temperature probe.
2 Remove the rubber holster that surrounds the entire meter by pulling it over the top of the meter.
3 Remove the small Phillips head screw on the rear of the meter.
4 Open the battery compartment and replace the 9V battery.
Re-assemble the meter before operating.
Declaration of conformity (CE)
The product 1760/2TM is in conformity with EMC directive 89/336/CEE emanated from the
Commission of the European Community.
Summary of Contents for 1760/2TM
Page 1: ...EN FRA IT...
