HS-620/630 User Guide
- 4 –
QM14 Issue 4
2
Operating Instructions
Figure 1. The VBA20
2.1 Sensor Connection
Fit the vibration sensor to the machine measurement position via a
magnetic base or stud. Connect the sensor cable to the BNC connector
on the meter. When a satisfactory sensor connection is made, the
sensor fault icon on the LCD display will disappear. Conversely, the
sensor fault icon will appear if the meter detects a poor sensor
connection.
2.2 Power On/Off
Power On - Push
SEL
key only for
sec. The meter defaults to the
overall vibration velocity range.
Power Off - Push two keys,
SEL
+
BRG
or
SEL
+
VIB
for 1 sec.
The meter will power-off on release of the keys.
The meter will automatically power-off after 3 minutes of no key
operation.
Integral cable
Hand Probe
with sensor
BNC connector
LCD Screen
VIB key
BRG key
SEL key
Summary of Contents for Hansford Sensors HS-620
Page 3: ...HS 620 630 User Guide...