PRESTOConnect User Manual
BETACOLOR PRESTO SPECTRO
PRESTOCONNECT PRELIMINARY USER
MANUAL.docx
2 / 15
10/19/2017
2
Safety Instructions
Warning
For safety reasons it is absolutely necessary to read through the user’s guide as well as all of the
instructions.
General safety rules
If the safety recommendations and instructions in this User Guide are not complied with,
measurement errors, data loss, physical injury or property damage may result
Installation
Start your Computer and wait until all boot processes have finished and your computer is ready to
operate.
Do not plug in the USB cable at this time.
Download the Installer from
www.peret.it
Install the PRESTOConnect software
Do not plug in the USB cable before the PRESTOConnect Software has been installed.
Start your Computer and wait until all boot processes have finished and your computer is ready to
operate. Run the setup-PRESTOconnect-vxxx.exe application to install the PRESTOConnect Software
on your PC and follow the instructions.
Once the setup is ready, you can connect the PRESTO SPECTRO to a USB 2.0 port. Wait until Windows
has completely installed the driver.
DRIVER without digital signature
On Windows 8.1 or Windows 10 there is the possibility of an error message that the “PERET USB
Driver does not have a digital signature”. In this case it is necessary to boot your Windows in a special
mode to enable the driver installation. Instructions can be found at
https://www.youtube.com/watch?v=71YAIw7_-kg
Hold down the shift key and restart your computer
Select the “Troubleshoot” option.
Select “Advanced” options
Select Startup Settings
Click RESTART
Press the number 7 key on your keyboard (Disable driver signature enforcement)
Windows will restart and the driver will now be installed correctly.
Use the device manager to update the driver
PERET USBDRV.inf
located in the
PRESTOConnect folder.
Run the PRESTOConnect Application
Connect the PRESTO SPECTRO via USB cable to your PC.
Click the PRESTOConnect Icon on your desktop
