Beta Marine BetaGen 10, Installation Manual, Page: 6 / 116

4
GENERATING SET IDENTIFICATION
{
IMPORTANT!
- To ensure you receive the correct advice or parts we ask you to
always provide the WOC (Works Order Card) number and/or the engine serial number
1 Beta Marine WOC Number
The generating set specification label is located on the
engine rocker cover, it details the WOC number, engine
type, engine serial number and output in kVA.
The engine serial number is additionally stamped on the
engine casing in the locations listed below.
BetaSet-BetaGen 7, 10 & 12
On the crank case above the starter motor on the port
side of the engine when viewed from the AC end.
BetaSet-BetaGen 14 & 21
On the crank case below the fuel injection pump on the
starboard side of the engine when viewed from the AC
end.
BetaSet-BetaGen 26, 33, 40, 49, 40T IIIA & 49T IIIA
On the crankcase behind the fuel filter on the starboard
side of the engine when viewed from the AC end.
BetaSet-BetaGen 4/2, 6/2 & 11/2
On the crank case below the fuel injection pump on the
starboard side of the engine.
4 AC Alternator Serial Number
Additional alternator labels can be found within the
alternator terminal box and on the casing detailing the
alternator type, serial number, kVA, RPM, Frequency in Hz,
Voltage & Phase.
The details on the AC alternator nameplate cover the
range of outputs available for that particular frame size
and may not be specific to the rating of your generating
set.
Please note that the alternator which produces the main
AC output of the generating set is sometimes referred to
as the generator and should not to be confused with the
engine mounted DC starter battery charging alternator.
3 Engine Serial Number
BetaSet-BetaGen 22/2 & 25/2
On the crank case above the starter motor on the port
side of the engine.
2