7
Connection Valve Assembly
For pool with connection valve
A
B
Adjustment of Jet Nozzle
+
-
Jet Nozzle Maintenance
1. Twist untill hearing a “click” sound, and pull out the Jet Nozzle to
clean the debris.
2. Insert and twist clockwise to put it back.
Assembly of the Frame pool can be
completed without tools.
IMPORTANT:
Bestway Inflatables will not be responsible for damage
caused to the pool due to mishandling or failure to follow these
instructions.
1. Lay out all parts and check that you have the correct quantities as
listed in the components list. If you are missing any parts do not
assemble the pool and contact Bestway Customers Service.
2. Spread out the pool and make sure the pool is right side up; let it sit
exposed to direct sunlight for 1 hour or more so that the pool is more
flexible during set up.
3. Place the pool near an adequate drainage system to deal with
overflow water and ensure the pool’s inlet A and outlet B are
correctly positioned to allow your filter pump to connect to a power
source.
Note
: Do not use extension power cords to power your
pump.
ATTENTION:
Do not drag the pool on the ground, this can damage
the pool.
Filling Pool with Water
ATTENTION:
Do not leave pool unattended while filling with water.
1. Fill pool until water capacity is 90%,
DO NOT OVERFILL
as this
could cause the pool to collapse. In times of heavy rainfall you may
Proper Water Level
0°
0%
30%
70%
90%
POOL MAINTENANCE
Warning:
If you do not adhere to the maintenance guidelines covered
herein, your health might be at risk, especially that of children. Pool
water treatment is essential for the safety of the users. Using
chemicals inappropriately will cause property damage and personal
injury.
NOTE:
The pump is used to circulate the water and to filter small
particles. In order to keep your pool water clean and hygienic, you
must also add chemicals.
1. It is recommended not to fill the pool with catchment water, drilling
water, or drainage well water: these waters generally contain
polluted organic substances including nitrates and phosphates.
Filling pools with water from the public network is advised.
2. Always keep your pool clean and apply the correct pool chemicals.
Unsanitary water is a serious health hazard. It is recommended to
use disinfectant, flocculant, acid or alkali chemicals to treat your
pool.
3. Clean the PVC liner regularly with non-abrasive brushes or a pool
vacuum cleaner.
4. Throughout the season, the water filtration system must run long
enough each day to clean the entire volume of water in the pool.
5. Check the filter cartridge (or sand in a sand filter) regularly and
replace dirty cartridges (or sand).
6. Regularly check the screws, bolts and all the metal parts for rust.
Replace if necessary.
7. If it rains, check that the water level is not higher than the specified
level. If water exceeds the specified levels, drain the pool to the
specified level.
8. Do not use the pump when the pool is in use.
9. Cover the pool when not in use.
10. For pool water treatment, the pH value is very important.
ATTENTION:
Do not leave the drained pool outside.
need to empty some of the water to ensure the level is correct.
2. When filling the pool is completed, check that the water is not
collecting on any side to ensure the pool is level.
IMPORTANT:
If pool is not level, drain water and re-level ground by
digging out. Never attempt to move the pool with water in it, serious
personal injury or damage to the pool may result.
WARNING:
Your pool may contain a great deal of pressure. If your
pool has any bulge or uneven side then the pool is not level, the
sides may burst and the water may discharge suddenly causing
serious personal injury and/or damage to property.
3. Check pool for any leaks at valves or seams, check ground cloth for
any evident water loss. Do not add chemicals until this has been
done.
NOTE:
In the event of a leak, patch your pool using the underwater
adhesive repair patch provided. Refer to the FAQ’s for further
information.
NOTE:
Drawings for illustration purposes only. May not reflect actual
product. Not to scale.
