background image

See below for part descriptions.

Components list:

Drawings not scaled to size.

Thank you for buying a Bestway pool. In order to ensure that you gain maximum enjoyment and safe 

use of your pool please follow the installation instructions in the DVD enclosed in your retail box 

along with the important safety guidelines in your owner’s manual. 

Assembly usually takes approximately 30 minutes with 2-3 people.

WARNING

Only for outdoor use.

Teach your children to swim.

Never dive, jump, or slide into the pool.

Adult supervision is always required.

Parents should learn CPR.

Never swim alone.

Keep all electrical radios, speakers and other appliances away from the swimming pool.

When you touch the filter, pump, or electrical parts, be sure the ground under your feet is “Bone Dry.”

All electrical outlets should have a GFCI and connections should be a minimum of 5 feet (1.52 m) from the 

outside perimeter of the wall of the pool. From 5–10 feet (1.52–3.05 m), there should be either a fixed 

connection (outlet box) or twistlock connection with a GFCI.

Connect power cords to a 3-wire grounding-type outlet only.

Keep all breakable objects out of the pool area.

Alcohol consumption and pool activities do not mix. Never allow anyone to swim, dive or slide under the 

influence of alcohol or drugs.

Severe electrical shock could result if you install your pump or filter on a deck. The pump or filter could fall 

into the water, causing severe shock or electrocution. Do not install on a deck or other surface at, above, or 

slightly below the top rail of the pool.

Do not use the pool during severe weather conditions, i.e. electrical storms, tornadoes, etc.

Be aware of overhead power lines when vacuuming your pool or using a telescoping pole.

Do not allow diving, climbing, sitting, or standing on the top rails of the pools.

Do not allow roughhousing and horseplay.

Do not engage in extended breath holding activities underwater; you may black out and drown.

Install a pool ladder(s) or staircase for entry and exit from the pool.

Keep deck clean and clear of objects that may create a tripping hazard.

Check regularly for signs of wear or loose bolts that could make the deck unsafe.

Instruct pool users about the proper use of all pool ladder(s) and staircases.

Face ladder going up or down.

Allow only one person at a time on the ladder.

Check all nuts and bolts regularly to ensure that the ladder stays sturdy.

Remove or secure the ladder to prevent entry to pool when not in use.

Please contact pool site dealer or manufacturer for additional safety signs if deemed necessary.

For pool service, select a certified pool professional.

Any equipment connected to the circulation systems shall be positioned so as to prevent their being used as 

a means of access to the pool by young children.

The safety of your children depends entirely on you! Children under 5 years old are at greatest risk. 

Please take care to avoid accidents.

Assign at least one person in charge of safety. Increase supervision if there are several people in the 

swimming pool. 

Test the water temperature before entering the pool by splashing water on your neck, arms and legs.

Pool and accessories should only be assembled by competent adults.

Your pool should be filled by low pressure water flow in order to prevent undue stress to the liner. Bestway 

will not be responsible for damage to the pool due to filling via water-truck. (See FAQ’s)

Toys, chairs, tables or similar objects that a young child could climb shall be at least 4 feet (1.22m) from the 

S-S-002014

pool.

Store chemicals and accessories out of the reach of children.

Never add chemicals to pool while it is occupied. Consult a 

specialist pool supply retailer to ensure correct chemical 

usage.

Always keep the pool water clean.

Pool water should be tested regularly to ensure it is optimal 

for safe and enjoyable use throughout the season.

Household pets should be kept clear of pool area to avoid 

structural damage to pool.

A fence or barrier is necessary to provide protection against 

potential drowning and near drowning and ensure the gate is 

kept closed at all times. The barriers are not a substitute for 

the constant supervision of children.

Cover the pool when it is not in use. Remove cover completely when in use.

Keep children away from pool covers to avoid entanglement, drowning or other serious injury.

A working electronic detector should be installed to alert you if someone has entered the pool area.

Under no circumstances should this equipment replace an adult’s nearby supervision.

Only use Bestway accessories with Bestway pools.

Properly maintain your pool in order to increase life span and safe use. (See Pool Maintenance Section)

All electrical components shall be installed in accordance with Article 680 of the National Electrical Code 

1999 “Swimming Pools, Fountains and Similar Installations” or its latest approved edition.

Do not operate pump while pool is in use. 

Prior to use of the pool, the installer shall affix all no diving signs and safety signs in accordance with 

installation instructions so they can be easily visible.

All equipment should be inspected frequently to detect and avoid deterioration, corrosion, broken parts or 

other hazards, which may cause injury.

Remember to reapply sunscreen protection regularly and always after swimming.

Failure to follow these instructions can result in property damage, injury or death.

The installer of the vinyl liner shall affix on the original or replacement liner, or on the pool structure, all safety 

signs in accordance with the manufacturer’s instructions.

If deck is used by the installer, it will need to comply with APSP-8.

The swimming pool cover is not designated as a safety barrier.

Please use artificial lighting during nighttime pool use, to illuminate all safety signs, ladders, steps, deck 

surfaces and walks.

Only persons older than 18 years of age can manipulate electrical accessories; they must conform to the 

appropriate safety principles of occupational safety and must be qualified to carry out the tasks on the 

electrical installation in accordance with any corresponding national regulations and standards.

Under no circumstances modify parts of the swimming pool. Do not make holes in the swimming pool, are in 

the steps of the ladder.

SAFETY

Learn the necessary rescue operations, especially those relating to rescuing children.

Rescue equipment should be located near the pool and the supervising adult should be fully trained to use it. 

Basic lifesaving equipment, including one of the following, shall be on hand at all times: a. A light, strong, rigid 

pole (shepherd’s crook) not less than 12 ft (3.66m) long. b. A min. ¼ inch (6.4mm) diameter rope as long as 

1-1/2 times the maximum width of the pool or 50 ft (15.24m), whichever is less, which has been firmly 

attached to a Coast Guard-approved ring buoy having an outside diameter of approximately 15 inches 

(38cm) or a similarly approved flotation device.

Post emergency numbers including:

• Fire

• Police

• Ambulance

• Poison Control Hotline

• Full home address

Keep a cordless water-resistant phone nearby pool during use.

In case of an accident:

• Take all the children out of the water immediately.

• Call for emergency support and follow their instruction/advice.

• Replace wet clothing with dry clothing.

For further safety tips check out the following websites:

www.homesafetycouncil.org

http://www.safety-council.org/info/child/water.html

RETAIN THESE DIRECTIONS FOR REFERENCE

CHOOSE THE CORRECT LOCATION

NOTE:

 The pool must be set up on a completely flat and level surface. Please do not install the pool if the 

surface is Inclined or slope.

Correct condition to set up the pool:

• The selected location has to be capable of uniformly supporting the weight for the entire time the pool is 

  installed, moreover the location must be flat and must be cleared of all objects and debris including stones 

  and twigs.

• We recommend positioning the pool away from any objects kids could use to climb into the pool.

  

NOTE:

 Position the pool near an adequate drainage system to deal with overflow or to discharge the pool.

  

NOTE:

 Position the pool near an AC power outlet protected by a GFCI-(Ground Fault Circuit Interrupter).

Incorrect conditions to set up the pool:

• On uneven ground the pool may collapse causing serious personal injury and/or damage to personal   

  property and will void the warranty and prevent any service claims.

• Sand should not be used to create a level base; the ground must be dug out if necessary.

• Directly under overhead power lines or trees. Be sure the location does not contain underground utility 

  pipes, lines or cables of any kind.

• Do not set up the pool on driveways, decks, platforms, gravel or asphalt surfaces. The selected location 

  should be firm enough to withstand the pressure of the water; mud, sand, soft / loose soil or tar are not 

  suitable.

• Grass or other vegetation under the pool will die and may cause odors and slime to develop, therefore we 

  recommend removing all grass from the selected pool location.

• Avoid areas prone to aggressive plant and weed species that may grow through the ground cloth or liner.

  NOTE:

 Check with your local city council for by-laws relating to fencing, barriers, lighting and safety 

  requirements and ensure you comply with all laws.

  NOTE: 

If have a filter pump, refer to the pump’s manual for instructions.

  NOTE: 

The ladder must match the pool size and should to be used only for entering and exiting the pool. It is 

  forbidden to exceed the permitted payload of the ladder. Check regularly if the ladder is properly assembled.

Installation

Assembly of the Rectangular Frame Pool can be completed without tools.

 

Bestway Inflatables will not be responsible for damage caused to the pool due to mishandling or failure to 

follow these instructions.

  1. Lay out all parts and check that you have the correct quantities as listed in the components list. If you are 

      missing any part do not assemble the pool, contact Bestway Customers Service.

  2. Spread out the pool and make sure the pool is right side up, let it sit exposed to direct sunlight for 1 hour 

      or more so that the pool is more flexible during set up.

  3. Place the pool near an adequate drainage system to deal with overflow water and ensure the pool’s inlet 

      A and outlet B are correctly positioned to allow your filter pump to connect to a power source. 

      Note:

 Do not use extension power cords to power your pump. 

      ATTENTION:

 Do not drag the pool on the ground, this can damage the pool.

  4. Insert the stopper plugs into inlet A and outlet B on the wall from the inside of the pool.

      NOTE:

 For 5.49m x 2.74m x 1.22m / 18’ x 9’ x 48”, 6.71m x 3.66m x 1.32m / 22’ x 12’ x 52”, 7.32m x 

      3.66m x 1.32m / 24’ x 12’ x 52”, 9.56m x 4.88m x 1.32m / 31.3’ x 16’ x 52” pools, please refer to the 

      connection valve installation on following page.

  5. Assemble the Top Rails. Start with the long side of the pool, begin by sliding Top Rail B into the pool 

      sleeve. Connect Top Rail A or Top Rail E to Top Rail B, ensure the spring-loaded pins snap into the 

      pre-drilled holes. Be sure to reference the Top Rail Combination Chart to determine the correct 

      configuration for your pool. Continue connecting and inserting additional Top Rails. Be sure to line up the       

      holes in the rails with the holes on the sleeves. (See Fig.1)

  6. Insert the C-Connectors into the Top Rails. (See Fig. 2.1/2.2)

  7. Install the U-Support; first insert the U-Support through the Pole Support at the bottom of the pool 

      (See Fig. 3.1/3.2), then insert the two ends of the U-Support into the exposed holes on the Top Rail 

      (See Fig. 3.3), ensure the spring-loaded pins snap into position. Repeat this procedure for the remaining 

      U-Supports.

      

NOTE:

 Complete one side of the pool before moving to the other side.

2

Heavy-duty repair patch

Liner

Drain valve

#F4H019B-01

Hose adaptor

#F4H019B-03B

Pool Size: 5.49m x 2.74m x 1.22m / 18’ x 9’ x 48”, 6.71m x 3.66m x 1.32m / 22’ x 12’ x 52”, 

7.32m x 3.66m x 1.32m / 24’ x 12’ x 52” , 9.56m x 4.88m x 1.32m / 31.3’ x 16’ x 52”model only

Stopper plug x 2

#F4H018B-02

Pool size: 4.12m x 2.01m x 1.22m /162” x 79” x 

48”, 4.88m x 2.74m x 1.22m /16’ x 9’ x 48” 

model only

Size of pool

No. of U-shaped 

support

Top Rail Combinations

Long Side

Short Side

No. of Top Rail

B-E-A

B-A-A-C

B-A-A-C

B-A-A-A-C

B-A-A-A-A-C

B-A-A-A-A-A-A-C

C-D

D-E

D-E

E-D-F

E-D-F

D-F-F-E

2

4

4

6

8

12

2

2

2

2

2

2

2

2

2

2

2

2

A

B

C

2

2

2

2

2

2

D

2

2

2

2

2

2

E

0

0

0

2

2

4

4

4

4

4

4

4

F

C-Connector

4.12m x 2.01m x 1.22m

   (162’’ x 79’’ x 48’’)

5.49m x 2.74m x 1.22m

(18’ x 9’ x 48’’)

4.88m x 2.74m x 1.22m

(16’ x 9’ x 48”)

6.71m x 3.66m x 1.32m

   (22’ x 12’ x 52’’)

7.32m x 3.66m x 1.32m

   (24’ x 12’ x 52”)

9.56m x 4.88m x 1.32m

   (31.3’ x 16’ x 52”)

10

12

12

16

18

24

PREVENT 

DROWNING

Watch children

at all times.

NO DIVING!

Shallow water.

You can be

permanently injured.

WARNING

No Jumping

Shallow Water

C-Connector

U-Support

Top Rail B

Top Rail A

Top Rail C

Top Rail F

Top Rail D

Top Rail E

2

1

3

4

5

6

7

8

Part No.

P6H510

P6H723

Description

1. Control valve
2. O-ring
3. Control Valve Gasket
4. Connector Nut
5. Gasket
6. Connector
7. Debris Screen
8. Screw

Reviews: