CHECK LIST
To check the parts printed on the package, verify that the
equipment components represent the model that you had
intended to purchase. In case of any damaged or missing
parts at the time of purchase, visit our website
bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Indoor and outdoor & above ground & portable wiring &
portable spa.
Only For Spas Equipped With Wi-Fi:
To choose the correct location for the spa equipped with Wi-Fi,
read the Spa Wi-Fi instruction leaflet included in the package
and the following instructions.
For All Spas:
The surface chosen to install the pool must respect the
following technical characteristics.
• Because of the combined weight of the water inside the spa
and the users, it is extremely important that the surface
chosen to install the spa is capable of uniformly supporting
the total weight for the entire time the spa is installed.
• An adequate drainage system has to be provided to deal with
overflow water for both indoor and outdoor installations.
During filling, draining or when in use, water may flow out of
the spa.
• The surface must be flat and smooth. If the surface is
inclined or uneven, it can create an unbalanced loading on
the structure of the spa. This situation can damage the
welding point.
• The selected surface must be clear of any type of object.
Due to the weight of the water, any object under the spa
could damage or perforate the bottom of the spa.
• The selected location must not have overhead power lines or
trees. Be sure the location does not contain underground
utility pipes, lines or cables of any kind.
• The selected position must be far from the house entrance.
14
Do not position any equipment or other furniture around the
spa. The water that comes out of the spa during the use or
due to a faulty product can damage the furniture inside the
house or surrounding the pool.
• Do not to install the spa on carpet or other floor materials
(e.g. untreated cork, timber or other porous materials) that
promote or harbor moisture and bacteria, or that could be
affected by water treatment chemicals used in the spa.
• Consult your local government authority for installation
regulations.
Suggested set-up surfaces:
grass, ground, concrete, and all
other surfaces that respect the above set-up conditions.
Not suggested surfaces:
mud, sand, gravel, deck, balcony,
driveway, platform, soft/loose soil or other surface that does
not meet the above set-up conditions.
Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with Lay-Z-Spa installation.
Determine the effects of airborne moisture on exposed wood,
paper, etc. in the proposed location. To minimize these
effects, it is strongly recommended to provide plenty of
ventilation to the selected area. Consult an expert to
determine if more ventilation is needed.
• Keep suitable air treatment in the indoor location (ventilation
and dehumidification) regularly to preserve the bathers’
safety and comfort.
• Empty the spa before removing it from the indoor location or
building.
Outdoor Installation:
• The selected surface must be clear of aggressive plants and
weed species. Those types of strong vegetation could grow
through the liner and create water or air leakage. The grass
or other vegetation that may cause odor or slime to develop
have to be eliminated from the set-up location.
• Do not leave the spa's surface exposed to direct sunlight for
long periods of time. We recommend protecting the spa from
direct sun light exposure by a cover when not in use.
Follow the important instructions above to choose the correct
surface and location to set up your spa. Damaged parts of
the spa, due to the fact that the set-up surface and location
does not match the instructions, will not be considered as
manufacture defect and will avoid the warranty and any
service claims. It is the responsibility of the owner to ensure
the site meets the requirements at all times.
• Consult your local professional installers for environmental
conditions, such as ground water and risk of frost.
• Recommended to protecting the spa from direct sunlight
exposure by a cover when not in use.
SPA HEATER EQUIPOTENTIAL BONDING TERMINAL
• It is recommended to arrange for a qualified electrician to
connect the spa pump to an equipotential bonding terminal
using a minimum 2.5mm
2
solid copper conductor.
HEATING RESET
• When using the Lay-Z-Spa for first time,
or after a long period of inactivity, be
sure to press the reset button on the
pump using a small and thin object.
• If the temperature on the control panel
(or the water temperature) has not
changed for 4-5 hours after activation of the heating system,
use a thin object to press the RESET BUTTON, and restart
the heating system.
• If the Lay-Z-Spa is under direct sunlight and the outside
temperature is above 35ºC there is a risk that the heating
system will not operate, and the display will show the alarm
code E08. Under these conditions, please wait until a cooler
time of day before pressing the RESET BUTTON with a thin
object and restarting the heating system. If the spa remains
in the same position, the alarm E08 can appear again. In that
case follow the same procedures.
Reset
