• This product is not intended for commercial use.
RCD WARNING
• Risk of electric shock. The RCD plug must be tested before each use.
• Do not use the pump if this test fails. For assistance, please visit the support
section on our website, www.bestwaycorp.com.
• Insert the RCD plug into a residual current device (RCD) having a rated
residual operating current not exceeding 30mA.
• Before inserting plug into a power outlet, make sure the current rate of the
power outlet is suitable for the pump.
SAVE THESE INSTRUCTIONS
TECHNICAL SAFETY INSTRUCTIONS
• Risk of electric shock, never run the filter pump when people are swimming
in the pool.
• The appliance must be supplied by an earthed power source.
• Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge
trimmers, and other equipment.
• This pump is for use with storable pools only. Do not use with
permanently-installed pools. A storable pool is constructed so that it is capable
of being readily disassembled for storage and reassembled to its original
integrity. A permanently-installed pool is constructed in or on the ground or
in a building such that it cannot be readily disassembled for storage.
• Using the pump with an unmatched electrical supply is dangerous and will
result in catastrophic failure of the pump.
• When working with electricity, turn the electrical power off at the circuit breaker
and lock breaker door. Failure to do so will result in increased risk of shock,
injury and possibly death.
• Do not remove the grounding prong or modify the plug in any way. Do not
use adaptor plugs. Consult a qualified electrician for any questions related
to the validity of your plugs grounding.
• Handle the pump with care. Do not pull or carry the pump by the power cord.
Never pull a plug from the outlet by yanking the power cord. Keep cord free
from abrasions. Sharp objects, oil, moving parts, and heat should never be
exposed to the filter pump.
• Cleaning and user maintenance must be performed by an adult above
18 years old who is familiar with the risk of electric shock.
• In case of doubt on the pump or any circulation devices, contact a qualified
installer, or the manufacturer/importer/distributor.
• Mind all the safety requirements and recommendations described in the
manual.
• Atmospheric conditions may affect the performance and life span of your filter
pump. Unnecessary wear and tear may occur during periods of cold, heat and
exposure to sun. Whenever possible, shelter the pump from these conditions.
• It is important to ensure the factory equipped stopper plugs for the inlet and
outlet ports replace the screens before removal or maintenance on the pump
is attempted.
• Do not add chemicals in the filter pump.
• Don’t plug or unplug the appliance if your hand is wet.
• Always unplug the appliance: on rainy days, before cleaning or other
maintenance, and when leaving it unattended on holidays.
MAINTENANCE
•
Make sure that the Filter Pump is unplugged before any maintenance.
• For the maintenance instructions, refer to illustration steps inside the manual. Drawings are for illustration purposes only.
May not reflect actual product. Not to scale.
• To optimize the Filter Pump performance and for sanitary reasons, we suggest replacing the filter cartridge with a new
one every two weeks.
INSTALLATION
• For the installation instructions, refer to the illustration steps inside the manual. Drawings are for illustration purposes
only. May not reflect actual product. Not to scale.
• Bestway will not be responsible for any damage caused to the Filter Pump due to mishandling or failure to follow these
instructions.
• It is imperative to check that the hydraulic connectors are not obstructed.
• Do not dry run the Filter Pump. Make sure both the pool's inlet and outlet valves are fully covered by water before
operating the Filter Pump.
SETUP
CHECK LIST
To check the parts included in the box, consult the part list inside this manual. Verify that the equipment components
represent the model that you had intended to purchase. In case of any damaged or missing parts at the time of purchase,
visit our website bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Place the Filter Pump on a solid and level ground; it must be positioned on the same level as the base of the pool. If the
Filter Pump is in an upper or lower position than the base of the pool, the performance and life span of the Filter Pump can
be compromised. The pool and the Filter Pump have to be positioned in an area with adequate drainage and easy access
for maintenance operations. Never place the Filter Pump in a area that may accumulate water.
5
WARRANTY TERMS
For information concerning warranty terms, visit our website at: www.bestwaycorp.com.
STORAGE
• Remove all accessories; be sure that Filter Pump, hoses and debris screens are completely clean and dry before the
storage. If all the parts are not completely dry, mold may result.
• Before storage, remove and dispose of the filter cartridge.
• We strongly recommend disassembling the Filter Pump when the environment temperature is below 10ºC / 50ºF.
• Store the Filter Pump in a dry place with a moderate temperature between 10ºC / 50ºF and 38ºC / 100ºF.
256
270
300
450
2-M6 bolt
2-M6 nut
ATTACHING A BASE
EN60335-2-41 TEST standard requires the filter pump to be vertically
fixed on the ground or a base made of wood or concrete before use.
There should be two holes 7mm in diameter on the base, the space
between which should be 256mm. Put filter pump on the base and attach
them together by fastening the bolts and nuts. All the base parts should
weigh at least over 18kg to prevent the pump from accidentally falling.
