bumper frame.
4. Attach quick disconnect fittings to ends of hydraulic hoses to match tractor ports. Then con-
nect hydraulic hoses to tractor ports in a sequence that is both familiar and comfortable to the
operator. It is suggested that the hydraulic hoses for the hydraulic pump be connected to the num-
ber one outlet, while the boom control hoses are connected to the number two outlet or to the outlet
that corresponds to the outermost control lever on the tractor’s hydraulic control console. A low
pressure return port for the hydraulic pump is recommended.
Before applying pressure to the hydraulic system, make
sure all connections are tight and that hoses and fittings
have not been damaged. Hydraulic fluid escaping under pressure can have sufficient
force to penetrate skin, causing injury and/or infection.
Always clean hose ends to remove any dirt before
connecting couplers to tractor ports.
5. Install the Raven or Spraying Systems spray controller unit in the tractor cab, following the
instructions provided with the controller unit. If the tractor is not equipped with a radar system, be
sure to also install the wheel drive speed sensor as instructed.
6. Extend the controller power cable from the tractor cab to the battery and connect the battery
terminal rings directly to the battery posts, making sure the positive (red) and negative (black)
wires correspond with the polarity of the battery terminals.
C2
WARNING:
!
IMPORTANT:
Summary of Contents for Field Pro II 1000
