16
5.6 Filter net replacement
5.7 Sweeping mode
Under normal circumstances, nozzle towards obliquely upward so as to avoid blowing away sewage on the
pool floor.
For some specific pools, sweeping mode could be used (
Adjust the nozzle obliquely downward
) for
blowing up debris located in dead corner or fine particles so as to collect or filter them by main filter system of
the pool.
5.8 Helpful tips
i.
Power off and take out batterypack immediately after use.
ii.
The cleaner should not touch pool walls while lifting out to avoid scratching the pool surface or
any damage to the cleaner.
iii.
Before lifting out from pool and placing on the pool edge, suspend the cleaner above water
surface for 10-15 seconds to empty the inside water.
iv.
Please hold the cleaner handle to lift it out from pool and never pull the cable.
Press buckle to
disassemble
Replace and press to
assemble