Owner’s Manual
P5383 Dream Glimmers
Warning
READ AND FOLLOW ALL INSTRUCTIONS
Use only under competent supervision.
Adult assembly only.
Battery Precaution
• Do not mix old and new batteries.
• Do not mix the different types of batteries. Do not mix alkaline, standard (Carbon - Zinc), or rechargeable (Nickel - Cadmium) batteries.
• Ensure batteries are installed correctly with regard to polarity (+ and -).
• Do not short-circuit the battery.
• Never attempt to recharge primary batteries as this may cause leakage, fire, or explosion.
• Rechargeable batteries are to be removed from this product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Never attempt to disassemble or open batteries as this can lead to electrolyte burns.
• Remove batteries from equipment which is not to be used for an extended period of time.
• Exhausted batteries are to be removed from this product.
• Do not dispose of product and its batteries in fire. Check your local regulations for proper disposal instructions.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the similar.
• Only use AAA batteries (not included).
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
SAVE THESE INSTRUCTIONS
Battery installation/replacement
1. Screw off the bottom cover of the dream glimmers. (See Fig.1)
2. Insert standard 3 x AAA cell size batteries. (See Fig.2) Be sure that the polarity is “+” to “+”, and “-“ to “-“.
3. Replace the bottom cover and screw tightly. It is ready to use.
IMPORTANT:
Please remove the batteries if you don’t use the dream glimmers for long time.
Installation
Fig. 1
Fig. 2
1
Fig. 3
Inflate the air bed (pump not included),
and insert the dream glimmers
into it.
（
See Fig.3
）
NOTE:
Do not over inflate.
Fig. 4
Power button
DISPOSAL
Meaning of crossed-out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information
regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damage your health
and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge.
Maintenance and Storage
For dream glimmers
1. Please remove the batteries if not in use for a long time.
2. Use a dry cloth to clean the surface.
3. Do not drop the product or it may break
For air bed
1. If product gets dirty, use a clean damp cloth and wipe gently on the flocked and PVC surface. Do not use harsh detergents to clean. Fold and store after product is dried.
2. Before storing the product, release all the air. Store in a cool and dry place.
3. Do not place sharp or heavy objects near or on top of the mattress. Doing so will cause damage and tears.
4. If product is damaged, please use the provided repair patch.
NOTE:
Drawings for illustration purpose only. May not reflect actual product. Not to scale.
Operation
1. Press the power button on the dream glimmers,the LED turns on with 3 colors alternating.
2. Press the power button again,the LED will be locked in one color.
3. Every time press the power button, the light of the color will be changed and locked.
（
See Fig.4
）
NOTE:
There is a 30-minute auto lock feature on the product.
