C
B
A
Closed:
This function stops water flowing between the sand
filter and the pool.
Filter:
This function is used to filter pool water and should be
positioned here 99% of the time. Water is pumped through the
sand filter, where it is cleaned and returned to the pool.
B
C
A
C
B
A
D
Backwash:
This function is used to clean the sand
bed; water is pumped down through the Collector Hub,
upwards through the sand bed, and deposited out of Port D.
C
B
D
A
Rinse
: This function for initial startup, cleaning, and sand bed
leveling after Backwash; water is pumped downwards through
the sand bed, up through the Collector Hub and deposited out
of the valve Port D.
6
A.
To test the GFCI plug, insert it into a grounding type receptacle.
B.
Press the “RESET” button; the indicator turns red.
NOTE:
If the indicator light is not on, the test has failed.
C.
Press the “TEST” button. The indicator turns off.
NOTE:
If the indicator light is not off, the test has failed.
D.
Press the “RESET” button, the indicator light turns red, and the sand filter is ready for use.
WARNING:
RISK OF ELECTRIC SHOCK. THE GFCI MUST BE TESTED BEFORE EACH USE.
WARNING:
DO NOT USE THE PUMP IF THE ABOVE TEST FAILS. Please contact your local Bestway Aftersales Service.
GFCI Test
RESET
TEST
A
B
C
RESET
TEST
D
RESET
TEST
CONTROL VALVE OVERVIEW
WARNING:
To prevent equipment damage and possible injury, always
switch off sand filter before changing the Control Valve function. Changing valve
positions while the pump is running can damage the Control Valve, which may
cause personal injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle and rotate to desired function.
OPERATION
Before switching on, please read the manual carefully.
STOP
