2
PREPARATION
Installation of small swimming pool usually takes only
10 minutes with 1 people.
Recommendations regarding placement of the pool:
• It is essential the pool is set up on solid, level ground. If
the pool is set up on uneven ground it can cause
collapse of the pool and flooding, causing serious
personal injury and/or damage to personal property.
• Do not set up on driveways, decks, platforms, gravel or
asphalt. Ground should be firm enough to withstand the
pressure of the water; mud, sand, soft / loose soil or tar
are not suitable.
• The ground must be cleared of all objects and debris
including stones and twigs.
• Check with your local city council for by-laws relating to
fencing, barriers, lighting and safety requirements and
ensure you comply with all laws.
INSTALLATION
• Assembly can be completed without tools.
•
Adult assembly required.
• Find solid, level ground and clear it of debris.
ATTENTION:
Do not set up the pool under cables or
under trees.
• Spread out the pool and make sure it is right side up.
• Cover the water valve.
• Drawings are for illustration purposes only. May not
reflect actual product. Not to scale.
OWNER’S MANUAL
WARNING
Never leave your child unattended – drowning hazard.
Keep assembly and installation instruction for future
reference.
• Only for domestic use.
• Only for outdoor use.
• Children can drown in very small amounts of water.
Empty the pool when not in use.
• Do not install the paddling pool over concrete, asphalt or
any other hard surface.
• Place the product on a level surface at least 2 m from
any structure or obstruction such as a fence, garage,
house, overhanging branches, laundry lines or electrical
wires.
• Recommend back towards the sun when playing.
• Modification by the consumer of the original paddling
pool (for example the addition of accessories) shall be
carried out according to the instructions of the
manufacturer.
561CF
Item
Aged
2+
PRODUCT DESCRIPTION
Refer to the item name or number stated on the
packaging.
Packaging must be read carefully and kept for future
reference.
DISMANTLING
1. Open water valve on the bottom of the pool, water will
drain automatically. (Check local regulations for
drainage by-laws). Then dismantle the frame of the pool
to release the water. Make sure release most of the
water in 20 minutes.
NOTE:
Drain by adult only!
2. Air dry pool.
ATTENTION:
Do not leave the drained pool outside.
REPAIR
If your pool is damaged, use the provided repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
POOL MAINTENANCE
WARNING:
If you do not adhere to the maintenance
guidelines covered herein, your health might be at risk,
especially that of your children.
1. Change the water of pools frequently (particularly in hot
weather) or when noticeably contaminated, unclean
water is harmful to the user’s health.
2. Please contact your local retailer to obtain chemicals to
treat the water in your pool. Be sure to follow the
chemical manufacturer’s instructions.
3. Proper maintenance can maximize the life of your pool.
CLEANING AND STORAGE
1. After use, take out the sand and rinse the sand pool
with water.
2. After draining, use a damp cloth to gently clean all
surfaces.
NOTE:
Never use solvents or other chemicals that may
damage the product.
3. Remove all the accessories and spare parts of the pool
and store them clean and dry.
4. Once pool is completely dry, sprinkle with talcum
powder to prevent pool from sticking together, fold pool
carefully. If pool is not completely dry, mould may result
and will damage the pool liner.
5. Store liner and accessories in a cool, dry place out of
children’s reach, with a moderate temperature between
5°C / 41°F and 38°C / 100°F.
6. During the rainy season, pool and accessories should
be stored as instructed above.
7. Unproper draining of the pool might cause serious
personal injury and/or damage to personal property.
8. Check the product for damage at the beginning of each
season and at regular intervals when in use.
• Test the Frame to ensure all connections are secure
before filling with water.
• Put 1cm / 0.39'' of water in the pool to cover the floor.
Once pool floor is slightly covered, gently smooth out all
wrinkles. Start in the center of the pool and work your
way clockwise to the outside.
• Continue to fill the pool until the water reaches the
welding line located 3cm-8cm (1.2''-3.1'') from the top of
the pool. Please kindly pay the upmost attention to not
over fill the pool for security reasons.
