18
303021213751_14x21cm_54138;54173_
欧规
HydroJet SPA
说明书
_
英
P61725ASS18
HYDROJET PRO
Cover
3.
5.
6.
4.
8.
9.
7.
NOTE:
Lift up the spa when
there is only a little water left.
Damages to the handles are
not covered under the warranty.
10
Draining the Spa
NOTE:
Drawings for illustration purposes only. May not reflect actual product. Not to scale.
Spa Repair
For Spa inflatable cover
If the spa is torn or punctured, use the provided heavy-duty
repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
For Spa Liner
If the spa is torn or punctured, use the provided PVC repair patch and glue (not
included) following these steps:
1. Clean and dry the area to be repaired.
2. Cut the provided PVC patch to appropriate size.
3. Use glue (not included) to coat the one side of the newly cut patch. Make sure the
glue is evenly distributed.
4. Wait for 30 seconds and then place the cut patch with glue over the damaged area.
5. Smooth out any bubbles of air that may be trapped underneath, and press firmly for
two minutes.
6. Wait 30 minutes before inflation.
7. The product is once again ready for use. Repeat this process should further leaks
occur.
NOTE:
DO NOT use hard brushes or abrasive cleaners.
Detergent residues and dissolved solids from bathing suits and chemicals may build
up on the spa walls. Use soap and water to clean the walls and rinse thoroughly.
Cleaning the spa
DEFLATION
P61726ASS18
P61725ASS18
P61727ASS18
P61726ASS18
2.
1.
P6H565ASS16
