kept off the ground to retain its cleanliness (particularly the surface in
close proximity to the water spa water surface). The cover should be
stored in an appropriate location, where it cannot be damaged, or
cause damage.
• Check the set water temperature and consider lowering it for the
times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the heater
entirely if not using the spa for an extended period of time (where
the spa provides this option, but still maintains residual
disinfection/pH-values).
• It is recommended to use an insulating ground cloth underneath the
spa to minimize heat loss through the bottom of the spa.
• Maintain clean filters to preserve appropriate working conditions for
the pump and avoid unnecessary water replacement and re-heating.
• Keep the spa away from the rest area to minimize noise disturbance.
• Recommended to ask a qualified contractor or a structural engineer
to verify if the support material is strong enough to support the
maximum design load of the spa, spa water and bathers. Read the
filled weight information on the package.
• Please keep at least 1m clearance around the spa.
• Consult your local government authority for water regulations related
to convenient water supply for filling the spa.
• Recommended to consult experts and/or local authorities to apply
local or national laws/regulations relating to childproof fencing,
safety barriers, lighting, and other safety requirements.
• Do not put the cover on the ground or any other dirty surface when
not in place on the spa.
• When the spa is being used, the cover should be placed in a clean,
dry area, otherwise it can pick up dirt and bacteria. Covers should
not be put on wooden tables or wooden decking because of the risk
of bleaching the wood. A cover lifter, or similar device, is useful for
ensuring that the cover does not come into contact with the ground.
A cover lifter is strongly recommended for spas in rental settings.
1.Indoor Installation
• Consult your local government authority for installation regulations.
• Keep suitable air treatment in the spa chamber (ventilation and
dehumidification) regularly to preserve the bathers’ safety and
comfort .
• Do not to install the spa on carpet or other floor materials (e.g.
untreated cork,timber or other porous materials) that promote or
harbour moisture and bacteria, or that could be affected by water
12
303021213751_14x21cm_54138;54173_
⅝㿺
HydroJet SPA
䈪᱄Ҝ
_
㤧
