Bestron Pure & Clean ABL930SR, Instruction Manual

Page: 32 / 52

32
EN
CLEANING AND MAINTENANCE - Cleaning the housing
1. Remove the plug from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
3. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
WARNING:
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
CLEANING AND MAINTENANCE - Removing waste from the dust container
1. Change the dust container immediately
once the ‘dust container full’ indicator turns
red (see Figure 1, number 15).
WARNING:
• It is possible that the indicator turns red
whilst the dust container is not yet full. If
so, then the nozzle, hose or tubes may be
blocked. These will then need to be cleaned.
2. Remove the plug from the wall socket.
3. Remove the hose.
4. Remove the dust container by pressing the
release button on the dust container (see
figure 7A) and pulling on the container, and hold it above a waste-bin.
5. Press the button to open the bottom flap (see figure 7B+C).
6. If so required, use your hand to remove any waste sticking to the container.
7. Close the bottom flap, and press until it clicks into place.
8. Fit the dust container onto the appliance, and click it into position.
CLEANING AND MAINTENANCE - Cleaning or replacing the filter
For best results clean or replace the filter after
every second or third use of the vacuum cleaner,
or more frequently if the filter is visibly blocked.
WARNING:
• Clean the filter regularly to avoid that the
filter becomes clogged and the engine
overheated.
1. Remove the waste from the dust container
(see “Removing waste from the dust
container”).
2. Open the filter lid (B).
3. Take the dust separation system (B+C) from
the dust container (A).
4. Take the filter from the dust separation system (D).
5. Rinse the filter and the dust separation system thoroughly in lukewarm water.
6. Allow the filter to dry thoroughly.
7. Mount the holders and filters in the reverse sequence.
WARNING:
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
• Do not clean the filter in a washing machine.
• Do not dry the filter with a hairdryer.
A B C
A
B
C
D