Bestron Pure & Clean ABL930SR, Instruction Manual

Page: 31 / 52

31
EN
6. Slide the hose handle into the telescopic tube (see figure 3A).
7. Press the button on the telescopic tube and
keep it pressed in; you can then extend or
retract the tube to the required length (see
figure 3B).
8. Press the foot button on the nozzle to set
the combi nozzle for use on hard or soft
surfaces, (see figure 3C). For use on hard
surfaces, press the foot button on the combi
nozzle to extend the brushes. Lift the button
for use on soft surfaces.
ACCESSORIES
This vacuum cleaner is supplied with one
combined accessory:
• a crevice tool with a narrow nozzle, which you
can use to clean radiators, window frames,
crevices, small openings, and similar;
• a dusting brush, which you can use to clean
delicate or irregular surfaces, furniture,
Venetian blinds, and similar.
OPERATION - STORAGE AFTER USE
1. Remove the plug from the wall socket.
2. Press the rewind button and keep it pressed
in; the power cord will automatically rewind
onto the reel.
WARNING:
• Guide the power cord whilst it rewinds onto
the reel, since otherwise the cord could
become tangled or the plug could strike
the back of the appliance. Take hold of the
power cord near the mark, and allow it to
gently slide through your fingers back into
the appliance, see Figure 5.
3. An attachment slot for the accessory bracket
is fitted to the back. Slide the bottom of the
accessory bracket into the slot. This avoids
the need to dismantle the vacuum cleaner
after use; you can store the assembled
appliance and retrieve it again quickly when
you need it.
A B
C