user’s instructions
23
English
reduce the vacuum suction when cleaning upholstered furniture and curtains. This will prevent the
fabric from being sucked into the nozzle.
note
If so required, you can also reduce the suction quickly by moving the slide on the hose grip.
6. Slide the telescopic tubes onto the hose handle, see Figure 3a.
7. Press the button on the telescopic tubes and keep it pressed in; you
can then extend or retract the tubes to the required length. See Figure 3b.
8. Press the foot button on the nozzle to set the combi nozzle for use on
hard or soft surfaces, see Figure 3c. For use on hard surfaces, press the
foot button on the combi nozzle to extend the brushes. Lift the button for
use on soft surfaces.
note
For wooden flors we reccomend you to use the special hard
floor brush
Figure 3
Accessories
This vacuum cleaner is supplied with one combined accessory:
• a crevice tool with a narrow nozzle, which you can use to clean radiators, window
frames, crevices, small openings, and similar;
• a dusting brush, which you can use to clean delicate or irregular surfaces, furniture,
Venetian blinds, and similar.
Figure 4
operAtion - storage after use
1. Remove the plug from the wall socket.
2. Press the rewind button and keep it pressed in; the
power cord will automatically rewind onto the reel.
Guide the power cord whilst it rewinds onto the reel,
since otherwise the cord could become tangled or the
plug could strike the back of the appliance. Take hold
of the power cord near the mark, and allow it to gently
slide through your fingers back into the appliance, see
Figure 5.
Figure 5
3. Stand the vacuum cleaner upright. An attachment
slot for the accessory bracket is fitted to the back of
the vacuum cleaner next to the front castor (see
Figure 6). Slide the bottom of the accessory bracket
into the slot. This avoids the need to dismantle the
vacuum cleaner after use; you can store the
assembled appliance and retrieve it again quickly
when you need it.
Figure 6
cleAninG And MAintenAnce
1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the appliance.
2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
a
b
c