WrapAround™ Windjammer™ – Installation Instructions
Rev. 1 1007
80041 pg. 3
Cut Slits for Pivot Brackets –
Optional
If you choose to leave the Pivot Brackets on the
vehicle, locate the reinforced plastic area on each
side of the center glass on the WrapAround™
Windjammer™. Cut a vertical slit through the center
of the reinforcement.
Slide the J Slide at the top of the WrapAround™ Windjammer™ into
the J Slide at the bottom of the Speaker cover.
Secure WrapAround™ Windjammer™
to Speaker Cover
Thread Buckles on Straps
Thread the end of the 15" Buckle Straps through
the male half of each buckle.
If you left the Door Pivots on the vehicle, slide them
through the slits cut in the fabric in Step 6.
Strap
Buckle
Roll the plastic strip along the edge of
the WrapAround™ Windjammer™ into
the channel in the Door Surround on
each side of the vehicle.
Secure WrapAround™ Windjammer™
to Door Surround
Cut Slits to leave
Pivot Brackets in
place
Slide Pivots through Slits
WrapAround™
Windjammer™
Speaker Cover
Hook J Slides
together
Driver’s Side Shown
Roll Plastic Strip
into channel on
Door Surround
