P12 - 54922 Rev. D 0618
Installation Instructions - TREKTOP NX GLIDE 2-Door
© 2018 Bestop, Inc.
Install Bow Mount Brackets
Step 2
(cont.)
Step 3
Header/Fabric Assembly
Step 2
486.52
Attach Side Bows to Header/Fabric Assembly (cont.)
Section 5
1
2
Right Underside
Right Underside
2
1
Right Topside
3
Pan Head
Washer Screw
Qty. 4 per side
Part # 393.79
Step 2
Step 3
Insert the end of the Right Side Bow #486.52
into the hole in the right side of the Header/
Fabric Assembly, aligning the two holes in
the tubing with the two holes in the header.
Make sure that the Spring Catch faces in.
Secure the Right Side Bow in place with
four (4) #8 x 1/2” Pan Head Washer Screws
#393.79: two from the underside of the
Header/Fabric assembly, and two from the
topside.
Repeat on left side, using Left Side Bow.
Replace the protective flaps on both sides,
and re-insert the screws you set aside, two for
each side.
486.53 393.79
Right Underside
Right Underside
Right Topside
Page 12
