Bestrail
™
Soft Tonneau Installation Instructions
Rev. A 0208
42712 / 42722 / 42732 / 42742 / 42752 / 42762 pg. 4
Install End Caps
Install Bows on Tonneau
Locate the fabric fl aps on the underside of the
Tonneau Fabric. Align the Bows between pairs of
fl aps. Install two (2) #8 x 1/2" Self Tapping Screws
through each fl ap into the Bow.
Install Tailgate Bar
Slide the prongs on the Tailgate Bar into the rear of
the BestRail™ channels on each side of the vehicle.
Hook the plastic strip on the rear of the Tonneau into
the channel on the Tailgate Bar.
Install Tonneau
Hook the plastic strip along the front of the Tonneau
into the channel in the BestRail™.
Make sure that the Bows rest on the BestRail™
channel and hook the plastic strip along the sides of
the Tonneau into the channel.
Push an End Cap into each end of all Bows.
Snap Tonneau to Corner Caps
Orient the Tonneau Fabric on the vehicle with the
snaps toward the front. Snap the corners of the fabric
to the Snap Studs installed on the Corner Caps.
Bow
End
Cap
Underside of Tonneau
Bow
Flap
#8 x 1/2" Self
Tapping Screws
Web Loop - aids
in removing
Tonneau
Roll Plastic Strip
into channel on
front and sides
BestRail™
Side Rail
Tailgate Bar
Rear of Vehicle
