90005 3
Rev. B 1298
Step One
Install the Left and Right Side Belt Rails on
each side of the vehicle. Place the Belt Rails
on the four holes on each side of the vehicle.
Secure the rails with four 5/16" Phillips Head
Bolts, four 5/16" Washers and four 5/16"
Tapping Plates.
Do not tighten the bolts yet.
Front
Sport Bar
Side Belt Rail
5/16" Phillips
Head Bolt
Tapping Plate
Side Belt Rail
Body Panel
Inside of Vehicle
Side Belt Rail Detail
Cross Section
5/16" Phillips Head Bolt
Sport Bar
Sport Bar
Sport Bar
5/16" Phillips Head Bolts
Front
Rear Corner
Belt Rail
Rear Corner
Belt Rail
Tapping Plate
Inside of Vehicle
Body Panel
5/16" Washer
Rear Corner Belt Rail Detail
Cross Section
5/16" Phillips
Head Bolt
Caution: When drilling in the top edge of the
vehicle body, check underneath for wiring.
Pull the wiring out of the way before drilling.
Step Two
Install the Left and Right Rear Corner Belt
Rails on each side of the vehicle. Place the
Corner Belt Rails on the holes on each side of
the vehicle. The second hole at the rear may
not be cut out. Mark the location with a
pencil. Center punch the marked location
and use a 5/32" Drill Bit to drill a pilot hole.
Then drill a 3/8" hole. Install the Corner Belt
Rails with three 5/16" Phillips Head Bolts, Three
5/16" Washers and three 5/16" Tapping
Plates.
Tighten the bolts, including the bolts
on the Side Belt Rails.
