Installation Instructions - Fabric Replacement Top for Trektop NX
© 2013 Bestop, Inc.
P10 - 52821 - Rev. B 1013
Page 10
Phillips
Screwdriver
Utility Knife
Section 5
Install Top Fabric On Header
Step 1
Top Fabric
Step 1
Lay the top fabric, backing side up and
aligned with the front edge of the Header.
Use a utility knife to slit the fabric over
each screw position. Locate the round hole
that marks the center of the plastic strip
(all other holes are slotted). Install a #8 x
5/8” Pan Head Screw in the round hole
to secure the fabric to the header as well
as to center the top. Then install #8 x 5/8”
Pan Head Screws in the remaining holes
along the front of the header.
Install an Oval Head Screw in the outside
holes on each side of the Header.
