P4 - 44941 Rev. A 1216
Installation Instructions - Rear Bumper End Caps
© 2016 Bestop, Inc.
Page 4
Section 4
Attach End Caps to Bumper
Step 1
431.59
413.69 484.93 470.06
Step 2
Step 1
Remove all the plugs and caps that are cover-
ing the holes in the bumper.
Slide the Right End Cap over the end of
the Bumper. Make sure that the holes in the
bumper align with the holes in the End Cap
and Step Pad.
Repeat this step with the Left End Cap on the
left side of the bumper.
Step 2
Once all the holes are aligned, use five (5)
M8-1.25x25 and one (1) M8-1.25x20 Button Head
Socket Screws, six (6) M8 Nylon Lock Nuts, and six
(6) M8 Flat Washers to attach the Right End Cap
assembly to the Bumper.
NOTE:
The shorter screw goes in the bottom.
Repeat this step with the Left End Cap on the left
side of the bumper.
Hardware
Tools
M8-1.25x20
Button Head
Socket Screw
Part #431.59
Qty. 2
M8-1.25x25
Button Head
Socket Screw
Part #413.69
Qty. 10
M8 Flat Washer
Part #484.93
Qty. 12
M8 Nylon Lock Nut
Part #470.06
Qty. 12
NOTE:
Bumper must be
removed from the vehicle
to perform this
installation
13mm socket
Ratchet
