Installation Instructions
Rear Bumper End Caps
Vehicle Application:
Jeep® Wrangler 2007- 2017
Part Number 44941
P1 - 44941 Rev. A 1216
Installation Instructions - Rear Bumper End Caps
© 2016 Bestop, Inc.
Before you begin installing your new Modular Bumper End Caps,
please read all the instructions thoroughly.
Do not rely in any way on the components of this
product to protect against injury or death in the event of an accident.
Never operate the vehicle in excess of manufacturer’s specifications.
Read and follow, precisely, all installation instructions provided when
installing this product. Failure to do so may result in a poor fit and
could place occupants of the vehicle in a potentially dangerous situation.
WEAR SEAT BELTS AT ALL TIMES
Support
Installation Time
Tools
Skill Level
Safety glasses should be worn at all
times when installing this product.
We’re here to help!
Go to www.Bestop.com and
click on “Contact Us”
13mm - 17mm - 18mm
Wrench
Safety Glasses
WARNING
3 - Moderately Difficult
1-1/2 hours
Installation Tips
13mm-17mm-18mm
19mm sockets
Ratchet
5mm Allen
Wrench
