12
between 5°C and 29°C and for Eco mode is between 1.5°C and 25.5°C. The temperature difference between
the ECO mode and the COMFORT mode must be at least 3.5°C. Each time you press the buttons to adjust the
temperature, you increase or decrease the temperature by 0.5°C. Press any other button except
/
to
finish the setting, otherwise after 5 seconds without action the setting is automatically saved. When the room
temperature is
the same or higher than the selected temperature, the heater will stop heating.
5. Keyboard lock
Press
M
button for three seconds to activate the keyboard lock function
, to unlock, press
M
again for three
seconds.
Remarks:
1. The keyboard lock function does not lock the standby
button.
2. The keyboard lock function will automatically be deactivated under the below
circumstances.
1) the appliance is put into standby mode by pressing standby
button.
2) the appliance suffers power disconnection.
If you want this option to be activated again you will need to press the M button for 3 seconds.
6. Window detector function
Press
to enter window detector function. Then press “
/
” to choose “ON” or “OFF”. If “ON” is
selected, the window detection function is activated and
icon will show on the screen. When temperature
drop is detected, the appliance will automatically enter anti-freeze mode with
icon flashing. If temperature
rises up, the appliance will go back to previous mode with
icon on. You can choose “OFF” to disable the
window detection function.
Remarks: the window detector function is not available under anti-freeze mode.
7. In case of power failure
All of the above settings for temperature, time, date of the week, and programs remain valid until the power is
removed.
Keyboard lock