BESTEK NSP-20H1, User Manual

Page: 26 / 47

26
About the BIOS
The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make
changes to the system configuration and tailor your system to suit your individual work needs. It is a ROM-
based configuration utility that displays the system’s configuration status and provides you with a tool to set
system parameters. These parameters are stored in non-volatile battery-backed-up CMOS RAM that saves this
information even when the power is turned off. When the system is turned back on, the system is configured
with the values stored in CMOS.
With easy-to-use pull down menus, you can configure such items as:

Hard drives, diskette drives, and peripherals

Video display type and display options

Password protection from unauthorized use

Power management features
When to Run BIOS
This program should be executed under the following conditions:

When changing the system configurations.

When a configuration error is detected by the system and you are prompted to make changes to the
Setup program.

When resetting the system clock.

When setting the CPU clock speed so that it automatically runs either fast or slow.

When redefining the communication ports to prevent any conflicts.

When making changes to the Power Management configuration.

When changing the password or making other changes to the security setup.
Normally, CMOS setup is needed when the system hardware is not consistent with the information contained
in the CMOS RAM, whenever the CMOS RAM loses power, or when the system features need to be changed.
When to Update BIOS
In the event that new features are released and a BIOS update is required, you will need to update your BIOS on
your own, with the help of an appropriate guide, a reference tool, and some command files for the job.
Please seek for help from your local dealer, or send your request to our technical support department.