1. Place sling behind seated patient with the 2 red pads under the arms.
2. Cross the adjustable chest belt over and fasten it securely using the
buckle (adjust for comfort).
3. Cross the short black strap over and pull the left loop strap through the black strap.
4. Hook the two loop straps to the hooks (“A” to “a” and “B” to “b”) on the lift boom
using the same hook and loop sequence on each side.
5. The black strap should loop around both shoulder straps and will be straight
across in front of patient to stabilize the sling during lifting.
6. Have patient grasp the arms of the boom and tilt head back slightly.
7.
Make sure the patients feet are firmly on the platform and knees are touching the
kneepads with kneecaps just above the padding.
8. Use the lift to complete the lift and pivot transfer.
P 3
FITTING STAND ASSIST SLING
Shoulder Strap
Shoulder Strap Loop
Waist Belt
Belt Buckle
Red Pad
Black Strap
Attach the shoulder straps to the hooks.
Sling Loop Options
CENTER LOOP
SHORT LOOP
LONG LOOP
LONG LOOP - reclined position
CENTER LOOP - semi reclined
SHORT LOOP - most upright
20
BEFORE LIFTING THE PATIENT, PULL ON
EACH
SLING LOOPS
TO ENSURE THE LOOP IS HOOKED ONTO THE SPREADER BAR
PROPERLY
A
B
a
b
Summary of Contents for BestStand SA600
Page 30: ...Notes 29...
Page 31: ...Notes 30...
