background image

26183-5  AN

16

SERVICE: 1-888 8BESTAR (1-888 823-7827)

VB-1134 

4 in (102 mm)

1

2

3

Locate stud centerlines using electronic stud finder. Use pencil 
to mark stud centerlines above the upper back of wall bed.

Drill a 1/8 in or 3 mm pilot hole into the wall stud to determine the type of wall 
structure present.

WOOD found behind the wall board?

a.  Use a 1/8 in drill for the pilot hole on part 71. 
b.  Use the wood stud mounting approach with the six #10 x 4 in VB-1134 screws provided.

VB-1134 

4 in (102 mm)

4

CONCRETE found behind the wall board?

a.  Use a 5/32 in masonry drill for the pilot hole on part 71 and for the wall.
b.  Use the masonry wall structure mounting approach with the six #10 x 4 in VB-1134 screws provided.

WARNING

RISK OF SERIOUS INJURY or DEATH: improper assembly, 
use, or loading can lead to product instability, tip-over, 
or collapse.

•  Assemble following all instructions using all indicated parts 
 and 

hardware.

•  Attach cabinet to the wall (wood stud, metal stud, or masonry) 
 structure.
•  Verify product is stable on its own.
•  Do not allow children to stand, climb, or hang on furniture.

AVERTISSEMENT

RISQUE DE MORT ou DE BLESSURES GRAVES : Un assemblage, 
une utilisation ou un chargement inappropriés peuvent entraîner 
l’instabilité, le renversement ou l’effondrement du produit.

•  Complétez l’assemblage en suivant toutes les instructions et en utilisant 
  toutes les pièces et le matériel indiqués.
•  Fixez le caisson à la structure du mur (montants de bois, montants de métal
   ou maçonnerie).
•  Vérifiez que le produit est stable.
•  Ne laissez pas des enfants grimper et se tenir debout sur le meuble, 
  ou s’y accrocher.

ADVERTENCIA

RIESGO DE LESIONES GRAVES o DE MUERTE: Un montaje, 
uso o carga inadecuados pueden provocar la inestabilidad, 
el vuelco o el colapso del producto.

•  Ensamble siguiendo todas las instrucciones y utilizando todas las piezas 
  y herrajes indicados.
•  Fije el armario a la estructura de la pared (montante de madera, 
  montante metálico o mampostería).
•  Compruebe que el producto es estable por sí mismo.
•  No permita que los niños se pongan de pie, trepen o se cuelguen 
  de los muebles.

12

2

-

0

0

0

9

9-0

122-00099-0

WALL ANCHORING INSTRUCTIONS

ATTACHING THE CABINET TO THE WALL STRUCTURE

INSTALLATION RECOMMENDATIONS 

Summary of Contents for Murphy 116862





























































Reviews: