If you press the “ION” symbol in any mode, you can start
and stop the release of healthy anions.
If the “ “ sign on the LCD flashes after switching on
and all the HEPA square indicators do not illuminate, the
highly-efficient HEPA filter must be replaced with a new
highly-efficient HEPA filter (see chapter Installing and
replacing filters, to change the filter). Start the machine
after replacement, press and hold the RESET symbol for
5 seconds. The timer will correct itself and the
“ “ sign will stop flashing.
Caution: If the HEPA filter operates at speed 5, it has a
service life of 2000 hours.
The value of the fine dust particles in the air is indicated on
the display. This rises and falls with good and/or bad room
air.
Press the “UV” symbol in any mode to switch on or switch
off the UV lamp. The UV lamp kills effective bacteria in
the air.
ION
UV
RESET
