The Romeo’s tire cradle comes
configured to accept a maxi-
mum 16” diameter by 7” wide
tire. Note: exceeding these
parameters may force and hold
the locking mechanism into a
locking position. The oversized
tire must be lifted out of the
cradle manually to release it.
After first loading your aircraft
into the cradle, adjust the cradle
so that it properly cradles your
tire and tighten. Note: these
bolts are only hand-tightened
from the factory. Adjust the
side plates to center your tire
and tighten. Use a 3/16” allen
wrench. Using a metric size may
damage the tug.
Exceeding the tug parameters
creates situations where the
locking hook or Lazy Susan
locking pin may not engage or
disengage. Carefully jogging
the tug back and forth may
help. Calling the Best Tugs™
support team is suggested.
800.914.2003
Always turn off the master
switch when charging.
Turn on the controller
Before turning on the tug.
Turn off the tug before
Turning off the controller.
Failure can lead to severe
damage to yourself, your
plane and your tug!
Customization, Tips, and Tricks
