9
13. LIGHT BULBS REPLACEMENT
This range hood requires shielded halogen bulbs (120 V, 50 W, MR16 with GU10 base) included (2 for
36” width hood, 3 for 48” and 60” width hoods).
1. To remove bulbs, gently push upwards and turn
counterclockwise to disengage bulb leads from
their grooves.
NOTE: To ease removal of the bulbs, use a
rubber dishwashing glove or use suction
cup tool available from Best. Contact Best
Technical Support at 1-800-558-1711 to
order suction cup tool, part no. 99526707.
2. Install the new bulbs by placing the bulb leads into their grooves in the socket.
3. Gently push upwards and turn clockwise until secure.
1
2
3
HO0089
WARNING
!
Do not touch lamps during or soon after operation. Burns may occur. In order to
prevent the risk of personal injury, only install shielded halogen lamps. Also, ne-
ver install a cool beam, a dichroic lamp, a lamp not suitable for use in recessed
luminaires or identified for use in enclosed fixtures.
14. CARE
Baffle Filters
The baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your
cooking style generates greater grease like frying foods or wok cooking.
Remove baffle filters by pushing them towards the front of the hood and rotating filters downward.
Baffle filters are dishwasher safe. Allow filters to dry completely before reinstalling them in the hood.
Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may
occur if using phosphate detergent or as a result of local water conditions—but this will not affect filter
performance. This discoloration is not covered by the warranty.
Grease Drip Rail
The grease drip rail should be cleaned frequently. Lift it out from the hood and use a warm detergent
solution. As for the baffle filters, wash more often if your cooking style generates greater grease like
frying foods or wok cooking. Allow grease drip rail to dry completely before reinstalling it in the hood.
Blower Cleaning
Remove the filters in order to access the blowers. Vacuum blowers to clean. Do not immerse in water.
Hood cleaning
Stainless steel cleaning:
Do:
• Regularly wash with clean cloth or rag soaked
with warm water and mild soap or liquid dish
detergent.
• Always clean in the direction of original polish
lines.
• Always rinse well with clear water (2 or 3
times) after cleaning. Wipe dry completely.
• You may also use a specialized household
stainless steel cleaner.
Don’t:
• Use any steel or stainless steel wool or any
other scrapers to remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction
residues reach the hood. During construction/
renovation, cover the hood to make sure no
dust sticks to stainless steel surface.
