5
2. PREPARE INSTALLATION (
CONT
'
D
)
Parts sold separately:
- ABWPD Series Backsplash, 36’’ or 48’’ width (optional)
- AEWPD Series Decorative Flue, to be installed over the hood (optional)
- AWWPD Series Wall Extension, 36’’, 48 or 60’’ width (optional)
- Transitions, duct, elbows, dampers, wall and roof caps.
Refer to pages 3 for a complete list of venting options and model numbers.
NOTE: During installation, protect countertop and/or cooktop.
3. INSTALL BACKSPLASH (
OPTIONAL
)
ABWPD Series
(for 36’’ and 48’’ widths range hoods only)
Backsplash must be installed before the hood shell because the hood shell covers the backsplash top
mounting screws (see instructions packed with backsplash).
4. INSTALL WALL EXTENSION (
OPTIONAL
)
AWWPD Series
Wall extension must be installed before the hood (see instructions packed with wall extension).
5. REMOVE KNOCKOUT OPENING
Punch out the electrical knockout hole on the back of the
hood. Install the wire clamp (included in parts bag).
HR0072
6. REMOVE BAFFLE FILTERS AND GREASE DRIP RAIL
A.
Remove tape on filters.
Remove filters from hood and set aside.
NOTE: It is recommended to start with the center one(s).
B.
Remove tape on grease drip rail (
1
).
Lift out grease drip rail and set aside.
HD0462
A
B
1
