- 8 -
OPERATION
The hood is operated using the (5) push buttons located on the front edge of the
hood.
The
Light O
ff
switch turns the lights o
ff
and on.
The
Light Intensity
switch increases and decreases the lighting level.
The
Blower O
ff
/Speed
switch turns the blower o
ff
and changes blower speed to four
di
ff
erent speed settings: high, medium-high, medium-low and low speed. Depress
and hold the button for 2 seconds to turn the blower o
ff
.
The
Blower On/Speed
switch turns the blower on to four di
ff
erent speed settings:
Low, medium-low, medium-high and high speed.
The
LED Display
:
• Indicates blower speed selection from 1 (lowspeed) to 4 (high speed).
• Flashes the blower speed when the 10-minute delay o
ff
has been activated.
• After 30 hours of operation, the center segment of the display blinks and remains
lit, indicating that the
fi
lter needs to be cleaned.
The
Delay o
ff
feature: When pushed, the blower will continue to operate at the
current speed setting for 10 minutes before automatically turning itself o
ff
.
The
Filter Alarm Reset
switch is used to reset the 30-hour
fi
lter timer. After the
fi
lter is cleaned or replaced, press this switch once to reset the
fi
lter clean alarm.
Light OFF
Light
Intensity
Blower O
ff
/Speed
LED Display
Delay o
ff
/
Filter Alarm Reset
Blower On/Speed
HEAT SENTRY™
Your hood is equipped with a HEAT SENTRY™ thermostat. This thermostat is a
device that will turn on or speed up the blower if it senses excessive heat above the
cooking surface.
1) If blower is OFF - it turns blower ON to HIGH speed.
2) If blower is ON at a lower speed setting - it turns blower up to HIGH speed.
When the temperature level drops to normal, the blower will return to its original setting.
WARNING
The HEAT SENTRY thermostat can start the blower even if the hood is turned
OFF. When this occurs, it is impossible to turn the blower OFF with its switch.
If you must stop the blower, do it from the main electrical panel.
REMOTE CONTROL:
An optional ACR Series remote control (purchase separately) can be used to
operated the power pack.
