- 7 -
MAINTENANCE
Grease Filters
The grease
fi
lter/s should be cleaned frequent-
ly. Use a warm detergent solution. Grease
fi
lters are dishwasher safe.
To take o
ff
the
grease
fi
lter/s
fi
rst open the
closure panel pulling downwards. See Fig.10
To take o
ff
the grease
fi
lter/s: at the handle,
push the stop inwards and pull the filters
downwards. See Fig.11.
Hood Cleaning
Stainless steel is one of the easiest materials to
keep clean. Occasional care will help preserve
its
fi
ne appearance.
Cleaning tips:
l
Hot water with soap or detergent is all that
is usually needed.
l
Rinse water. Wipe dry with a clean, soft cloth
to avoid water marks.
l
For discolorations or deposits, use a non-
scratching household cleanser or stainless
steel polish with a soft cloth.
l
For stubborn cases, use a plastic scour-
ing pad or soft bristle brush together with
cleaser and water. Rub lightly in direction
of the “grain” of the stainless
fi
nish. Avoid
using too much pressure which may mar
the surface.
l
DO NOT
allow deposits to remain for long
periods of time.
l
DO NOT
use ordinary steel wool or steel
brushes. Small bits of steel may adhere to
the surface causing rust.
l
DO NOT
allow salt solutions, disinfectants,
bleaches, or cleaning compounds to remain
in contact with stainless steel for extended
periods. Many of these compounds contain
chemicals which may be harmful. Rinse with
water after exposure and wipe dry with a
clean cloth.
Painted surfaces should be cleaned with warm
water and mild detergent only.
CLOSURE PANEL
GREASE FILTER/S
Fig.10
Fig.11
INSTALL RECIRCULATION
KIT (Non-Duct Option Only)
Purchase Charcoal Filter Kit Model AF-
CP195P52 for P195P1M52 or AFCP195P70
for P195PM70.
Replace
fi
lters every 3 months.
