27
TrOuBleshOOTing guide
ERROR CODES
If a failure occurs with your treadmill, an error code will appear on the main console to help troubleshoot
the unit. A list of error codes are shown below in the case such an event were to occur. If you experience
an error code with your treadmill, please unplug your treadmill and contact your authorized Best Fitness
dealer or a Best Fitness factory-authorized service company or contact Best Fitness customer service.
E01
:
COMMUNICATION ERROR
■
E01 occurs when the communication between the console and the controller is not functioning
properly.
■
Check the communication line connections first to make sure it is not loose or the cables are not
pinched.
■
Replace the damaged cable if necessary.
■
Turn the power off and on again to reset the treadmill.
E02
:
NO VOLTAGE SIGNAL DETECTED FROM MOTOR
■
E02 occurs when controller detects no working voltage from motor power cords.
■
Check the connection between motor power and controller.
E03
: SPEED SENSOR ERROR
■
When troubleshooting this error, do not stand on the running mat!
■
E03 occurs when the console is not picking up the motor speed signal.
■
In other words, when the motor speed is not correctly fed back to the controller and console, the
treadmill will shut off to protect the user and E03 will be displayed on the console.
NOTE
:
To quickly resolve the E03 error, check that the speed sensor is properly lined up, for cable damage, and the
integrity of all connectors. If nothing is wrong, report the E03 error to your service center by making sure you
note down the circumstantial details.
For example:
1. Is the motor not working when you push the start button and E03 display immediately?
2. Does the motor and running belt move when you push the start button but then stop and display an E03?
3. Is the treadmill stopped and displaying an E03?
4. If the motor is in operation when E03 is displayed, is the treadmill at low speed (1mph) or high speed
(7mph)?
E05
:
MOTOR OVERLOADING
■
E05 occurs when the motor is being overloaded.
■
Check to see if there is motor damage. If so, replace the motor.
E07
: SAFETY KEY ERROR
■
E07 occurs when the safety key is not in proper contact position with the console.
■
Check for positive contact from safety key to the console.
Meijer.com
Summary of Contents for BFT2
Page 1: ...BFT2 O w n e r s M a n u a l v 121808 Meijer com...
Page 9: ...9 S T EP 1 Above shows STEP 1 assembled and completed Meijer com...
Page 11: ...11 S T EP 2 Above shows STEP 2 assembled and completed Meijer com...
Page 29: ...29 HARDWARE Actual Size Shown Meijer com...
