Best Fitness BFMG20, Owner'S Manual

Page: 18 / 51

17
7
s t e p
Be careful to assemble all components
in the sequence they are presented.
A. Install Pulley (C6) to (Z), (C2) to (A), (C3) to (A) and (C4) to (Y) by using:
Two 29 (M10x42 hex head bolt)
Four 35 ( Φ10 washer)
Two 38 ( Φ10 nylon lock nut)
B. Install Pulley (C5) to (AA) by using:
One 29 (M10x42 hex head bolt)
Two 35 ( Φ10 washer)
One 38 ( Φ10 nylon lock nut)
Connect (10) to (AA) and secure using (40).
Connect (9) to (10).
Connect (9) to (A) as shown in the diagram.
C. Install Pulley (C1) to (T) using:
One 29 (M10x42 hex head bolt)
Two 35 ( Φ10 washer)
One 38 ( Φ10 nylon lock nut)
D. Route Cable (6) from (C1) to (C2).
E. Bring Cable (6) under (C2) and towards (C3).
F. Route Cable (6) up from (C3), towards, around and down form (C4) and around and up from (C5).
G. Bring Cable (6) from (C5) up and around (C6) then back down and terminate to (A) as shown in the
diagram.
H. Tighten all remaining loose bolts and apply bolt caps as shown in the Detail View.