Best Fitness BFMG20, Owner'S Manual

Page: 10 / 51

9
3
s t e p
Be careful to assemble all components
in the sequence they are presented.
nOte:
Finger tighten all hardware in this step. do not wrench tighten until end of step 4.
A. Connect Press Arm Support (K) to Top Frame (G) using:
One 25 (M10x82 hex head bolt)
Two 35 ( Φ10 washer)
One 11 (shaft)
One 38 ( Φ10 nylon lock nut)
B. Insert Convex End Caps (16) into Press Arm Support (K) as shown in the diagram.
C. Connect Left Butterfly Frame (L) and Right Butterfly Frame (M) to Press Arm Support (K) using:
Two 25 (M10x82 hex head bolt)
Four 35 ( Φ10 washer)
Two 11 (shaft)
Two 38 ( Φ10 nylon lock nut)
D. Connect Label Board (Q) to Press Arm Support (K) using:
Two 32 (M8x60 hex head bolt)
Two 36 ( Φ8 washer)
Two 37 ( Φ8 spring washer)
Apply Decal (1A) to Label Board (Q).
E. Connect Arm Pad (X) to Left Butterfly Frame (L) and Right Butterfly Frame (M) using:
Four 31 (M8x65 hex head bolt)
Four 36 ( Φ8 washer)
Four 37 ( Φ8 spring washer)
F. Slide PVC Sleeve (3) into Left Handle Frame (N) and Right Handle Frame (P).
G. Connect Left Handle Frame (N) and Right Handle Frame (P) to Left Butterfly Frame (L) and Right
Butterfly Frame (M) by using:
Two 26 (M10x75 hex head bolt)
Four 35 ( Φ10 washer)
Two 34 (nylon washers)
Two 38 ( Φ10 nylon lock nut)