6
Be careful to assemble all components
in the sequence they are presented.
A.
Thread Rubber Bumpers (26) as shown in the diagram.
B.
Connect Arm Support Frame (46), Rear Support Tube (3) and Main
Structure (1) using:
One 32 (M10x78 hex head bolt)
Two 45 (M10 washer)
One 42 (M10 nylon lock nut)
C.
Connect Arm Support Frame (46) to Main Structure (1) completely by using:
Two 32 (M10x78 hex head bolt)
Four 45 (M10 washer)
Two 42 (M10 nylon lock nut)
D.
Slide Shaft (8) into Main Structure (1) as shown and secure Bolt M6 (47).
E.
Adjust Main Structure (1) and Rear Support Tube (3) to the desired angle
using Safety Pin (28).
NOTE
: The BFAB20R may be folded for easy storage by removing Safety
Pin (28).
s t e p
1
Summary of Contents for BFAB20R
