52" Truss Rafter
4.
When assembling the last truss, install a 2x4-6' board across the truss. Secure with 10d
Step 1
Assemble Roof Trusses
It is important that all the trusses be assembled the same. Using 10d sinkers, tack short 2x4
packing blocks around the top to insure that all the trusses are assembled the same.
1.
Temporarily install a 2x4-8' board, to the end of the floor, extending 1-1/2" above the surface
of the floor . Use 2-1/2" screws.
2.
Position two 52" long 2x4 truss rafters together Secure the tops together with a wood gusset.
Nail the wood gusset with (10) ten 6d common nails. Do Not attach the truss rafters to the
bottom 2x4 board. Apply wood gusset to the opposite side.
3.
Assemble (4) four more trusses.
2x4-8' Board
Wood Gusset
2x4-6' Board
Set trusses aside, leaving the 2x4-8' board attached to the floor.
