Best Barns Glenwood II, Assembly Book

Page: 5 / 24

C
99" Long 2x8
48" OSB Filler
:
:
:
:
:
:
2. Mark a 'C' anywhere first two stud marks. This is referenced in a later step.
3. Install (7) seven pre-cut wall studs between the top & bottom plates. Nail top plate to studs
using 10d sinkers. Nail bottom plate to studs using 16d galv. nails.
X
X
X X
X
X
C
X
X
Step 2 Assemble 12' Sidewalls
Step 3 Assemble Door Header
140-1/2" Treated Wall Plate
3. Repeat to assemble (3) three more 140-1/2" long wall frames.
Pre-Cut
Wall Studs
1. Cut (2) two 2x4-12' to a length of 140-1/2". Position the boards together and indicate with
'X' marks where the wall studs will be located.
Locate (2) two 10' long 2x8 boards and (2) 7-1/4" x 48" OSB fillers. Cut the 2x8s to a length
of 99". Install the OSB fillers to a 2x8 board. Apply wood glue to both sides of OSB and nail
2x8 boards together using 10d coated sinkers. Use (12) twelve nails spaced evenly on each side.
140-1/2"
Wall Plates
Stud Spacing
Top Wall Plate
Treated Bottom Plate
24" 19-3/4"
24"