1.
Cut (1) one 72" long 2x4 to a length of 69-1/2".
2.
Cut (2) two 68-1/2" long 2x4s to a length of 60-1/4".
3.
Mark spacing as shown and assemble a wall frame
using (4) four 72" long 2x4s, (1) one 69-1/2 header
support and (2) two 60-1/4” top and bottom plates.
Use (6) six 10d sinkers to nail header support to stud.
4.
Repeat to assemble another wall frame.
60-1/4" Top Plate
19-3/4"
24"
69-1/2" Header
Support
2.
Install a 48" x 75-3/4" siding panel to the back wall. Use 6d galv.
nails. Nail along the adjoining siding panel.
Step 5A
Set Walls
1.
Secure the back wall between the end wall panels. Secure panels together at the corners. Use
(4) four 10d sinkers per corner. Use 10d sinkers or, if erecting on a concrete slab, concrete
anchor bolts (not included) spaced 24" apart.
Step 4
Assemble Front Wall Frames
Nail Along Siding Edge
IMPORTANT: Make sure walls are plum and square.
