BESEN INTERNATIONAL GROUP CO., LTD.
BESEN-GROUP.COM, leading the EV Charging to a better way
Page 5
2. General
2.1 Introduction
EV Charging Station is very important during the system of EV charging system,
undertaking the task of supply the EVs. For Besen Group
series product, it is internally
developed products according the IEC61851-22, The devise is equipped with EVs to charge
EVs. At present, the series products have different modes: Type A connection and Type C
connection and two installation modes: pole-stand and wall-mounted. The interface and
guide mode of charging is conforming to the designed requirements of IEC62196-2 and
meets the need for electric vehicles in Europe market.
2.2 Lectotype
According to functions, application and installation, there are so many choices for the EV
charging station. The end-user could select what you need. The planning rules are as
followed:
Planning Rules: Type A
The manual is for Besen Group series EV Charging Station included detailed parameters
and installation information. For others, please refer to relevant manual.
2.3 System structure
As followed, it is the electric schematic diagram of AC Charging Station, it shows that the
device access to the AC power supply, through the intelligent control, the electric will be
delivered to the vehicle charger, and then vehicle charger will invert AC will be transferred
DC till fulfill the battery in the EVs .It is the whole course of charging.
N- Household use w/o key;
NK: Household use with key;
Installation Mode: V-Pole-stand, W-Wall-mounted;
Link: A: Type A connection, C: Type C connection;
Volt Type: S: single-phase, T: three-phase;
Current Level: 13A, 20A and 32A.
etc;
Single-inlet: 1; Dual-inlets: 2