-1-
1. INTRODUCTION
The BST-CT103 has been designed and tested according
to CE safety requirements for electronic measuring
apparatus, EN 61326-1 EN 61000-4-2 EN 61000-4-3
and other safety standard.
The BST-CT103 is designed to identify and trace wires or
cables within a group without damaging the insulation.
2. FILTER PROBE
A. Features
●
Works with any Tone Generator to identify wires.
●
Volume control for increasing sensitivity and
adjustable to suit work environment.
●
2 operation modes: Filter on / Filter off.
●
The auto-off function (5 minutes) prevents battery
consumption.
●
Power supply is available in any 9V battery with a
life of approximately 50 hours.
●
A phone jack is designed for headset or handset.
●
Flashlight function.
B. Instructions
●
Connecting the tone generator.
In terminated working cables:
Connect one test lead to a terminated wire and the
other test lead to earth or equipment ground. (See
figure 1)
In unterminated or non-working cables:
Connect one test lead to an unterminated wire and
the other test lead to another unterminated wire.
Press the round " " button for more than 1 second
to turn on the filter probe. You can hear a short beep
