Besam ASSA ABLOY Swingmaster 900, Service And Installation Manual

Page: 8 / 68

Besam Entrance Solutions 4 1/31/2008
2B
Important Safety Instructions
WARNING – To reduce the risk of severe injury or death, all instruction and installation of safety
equipment must be performed in accordance to ANSI 156.10 for pedestrian usage.
31B
Function Description of Circuits
71B
Function of Kill
If the kill circuit is closed on the master or slave control, the control(s) will ignore all signals and
immediately close door(s) at normal speed.
72B
Function of Locks
The control has an available output of 18 VAC/DC for external locks and lock modules. This output
will require an add on module by others to interface the external lock.
73B
Push and Go
Initiates the automation of the door by way of the act of “pushing the door”. Additional after market
hardware is required.
74B
Power Failure
After a power failure there is a warm up safety feature of 5 seconds. This allows the time for the
safety system to power up and observe the surrounding conditions.