background image

2

3

!

!

Thank you for choosing BeSafe iZi Sleep

Contents

Vital information

BeSafe has developed this seat with much care, to protect your 

child during the first phase of her or his life.

Vital information 

3

Preparing to install  

4

Rearward-facing belt installation 

5

Removing the seat 

7

Positioning the child 

7

Sleeping position 

9

Using the iZi Sleep with a stroller 

10

Removing and refitting the cover 

11

Cleaning instructions 

11

Warning: potential misuse 

12

Important advice 

14

Guarantee 

15

Point of Sale information 

15

•  It is NOT ALLOWED to mount the seat in a front 

passenger seat WITH AN ACTIVATED AIRBAG.

•  iZi Sleep can only be installed rearward-facing with 

a 3-point car belt, approved according to UN/ECE 

Regulation No.16 or other equivalent standards.

•  iZi Sleep is approved for group 0+, rearward-facing from 

0-13 kg.

•  The child must always be secured with the internal harness 

straps when seated in the child seat. The same applies 

to carrying  the seat and when using in combination with          

a stroller.

•  The seat cover contains magnets in the areas with the 

orange indications. Magnets can influence electronic 

equipment such as pacemakers.

•  If the child weighs over 13 kg or his shoulder height reaches 

above the highest position of the shoulder straps, you will 

need to change to a group 1 seat.

•  The seat must always be replaced following an accident. 

Although it may look undamaged, in the event of another 

accident, it might not be able to protect your child as well as 

it should.

•  Prevent the iZi Sleep from becoming trapped or weighed 

down by luggage, seats and/or slamming doors.

•  Before every use, make sure the harness is not damaged    

or twisted.

•  Make sure you can fit no more than one finger between the 

harness and your baby (1cm).

•  Make sure that the car belt runs in a straight line over 

the shoulder belt guide and through the belt slot at the             

buckle side.

•  If in doubt, consult either the child restraint manufacturer or 

the retailer.

It is important that you read this user manual BEFORE installing 

your seat. Incorrect installation could endanger your child.

!

Warning

•  IMPORTANT! Keep for future reference.

•  Never leave the child unattended.

•  Do not use the seat as reclined cradle once your child can sit 

unaided.

•  This seat is not intended for prolonged periods of sleeping.

•  It is dangerous to use this seat on an elevated surface. 

•  Always use the restraint system.

•  Do not use the seat if any components are broken or missing.

Using the seat as a reclined cradle

EN 12790-2009

2

Summary of Contents for iZi Sleep










Reviews: