BD930000
- IPR-K
Programming manual
v1.0
www.besknx.com
13
8
Manual function
Using the button on the front of the device, you can activate manual mode, as well as restore factory settings or allow firmware
updates.
If pressed for three seconds, the IPR-K will go into manual mode, turning the Ethernet LED at least orange or red (depending
on whether it was green or paid before). To exit this manual mode, the button must be pressed for another three seconds.
The operation of the manual function is selected by means of parameters in the configuration catalog of the IPR-K device, as
shown in the following image:
A timer after which the manual function will be automatically deactivated can be also selected.
