Check once again that all elements are
tightened properly and
fl
ush with each
other.
Use screwdriver to insert the missing
base boards on the outside of the wall
components.
To do this, tilt the board and insert the
tongue into the groove. You can press
the board upwards into the groove with
a screwdriver. Now screw the base
boards to the base frame.
Make sure that the spacing of all in-
serted boards is the same. In the next
step, you will mount the roof boarding.
Insert the window handle into the
lock in the window. Use a cordless
screwdriver or a screwdriver to screw
in the uppermost screw.
Be careful not to overtighten it if you
work with a cordless screwdriver.
You can screw in the bottom screw
after opening the window since the
window handle will not get in the way
anymore.
Check all functions of the window as
soon as you are done.
Now take the metal mount for the door
handle and
fi
t it in.
Make sure that you fix it with a
screwdriver because the screws
will be screwed in plastic nuts and
they may be easily overtightened.
Please be careful.
Watch a video on assem-
bly and alignment at www.
bertsch-holzbau.eu under the
menu item Video.
S
TEP
6
Attaching the handle sets
S
TEP
7
Attaching the outside base
Contact your specialist supplier if you experience any problems during assembly.
5
